Experimental verification of the existing method of analytical determination of radiation and thermal deformations of concretes and solutions on the basis of data on deformations of aggregate and cement stone for materials with low content of aggregates is carried out. The test was carried out on samples of solutions with different content of aggregate-sand based on the results of determining the size changes after heating at temperatures from 105 ° C to 400 ° C. It is shown that at the volume content of fillers less than 52% there are differences between the calculated and experimental values of changes in the size of solutions after heating. Moreover, the differences increase with the decrease in the volume content of the filler, with an increase in the heating temperature and the difference between the thermal deformations of the filler and the cement stone. The obtained results allow to correct the results of calculations using the specified existing analytical method for concretes and solutions with a filler content of less than 52%

Keywords: thermal and radiation deformations, solutions and concretes, analytical and experimental determination, filler content, microstructural stresses, cracking

The question of improvement of coatings of welded products is considered. The possibility of replacing sandblasting is being studied. The possibility of reducing the cost of welding is considered

Keywords: construction materials, reduction of construction materials costs

The article deals with the issues of dispersion of heterogeneous liquids by spray nozzles in order to divide them into components. The influence of various parameters on the size of the droplets obtained is investigated. For the mathematical description the probabilistic approach is applied, which allows to obtain a differential function of the particle size distribution, which can form the basis of the engineering method of calculation of this class of separators. An expression for determining the average value of the angular velocity of the internal flow is compiled. These dependences allow us to calculate the most probable value of the angular velocity corresponding to the decay of complex drops into secondary ones, which are the drops of the initial liquids.

Keywords: particle, emulsion, non-uniform liquid, droplets, jet, nozzle, velocity, flow, parameter, separator

The process of overcoming the risks of destruction of the life world by young spouses is studied. Methods of cognitive modeling are used. The theory of adaptive control is chosen as the basic paradigm. This allowed the study to build on the existing theoretical basis of structural analysis of adaptive systems with models in the adaptation circuit.To use the practical experience of cognitive modeling of systems with the inclusion of a person in the adaptation circuit, for example, training models based on a double feedback loop. It is proposed to use the technology of solving problems, based on the experience of past situations, namely, the technology of output based on precedents (Case-Based Reasoning, or CBR). A generalized adaptive model of reducing the risks of destruction of the life world of a young family on the basis of a double CBR – cycle is developed. The model describes the process of self-development of young spouses through continuous training in complex problem situations

Keywords: young family, life world, risk, cognitive modeling, model, precedent, adaptation

Abstract: the results of the analysis of existing and projected volumes of export cargo transportation in the freight-stressed areas of the Russian railway network to the ports of Azov-the black sea basin are Presented. It is established that the growth of traffic ahead of the development of the transport capacity of the studied railway directions. In this regard, foreign and Russian experience in the development of growing volumes of cargo transportation in terms of infrastructure constraints due to the organization of heavy train traffic has been studied. The measures of development of heavy traffic of trains are offered. The method of calculation of efficiency of the organization of heavy traffic on one of sites of the North Caucasian railroad is given.

Keywords: Key words: export transportation, perspective volumes, infrastructure restrictions, ways of elimination, efficiency of heavy traffic

This paper presents two methods of computer simulation (quantum chemical analysis and molecular dynamics) of the interaction of additives with the iron surface. Quantum chemical interaction of silicate and phosphate additives with iron surface was carried out. The plate model was used for quantum chemical analysis, calculations were carried out in the DFT approximation. The method of molecular dynamics is based on the calculation of the evolution of the system of interacting particles of atoms and molecules by integrating the equations of their motion. It is shown that the oxidation of the surface leads to a decrease in the adhesion energy of both individual additives and their combinations, allowing to find the influencing factors on the behavior of tribosystems.

Keywords: lubricant, method, quantum chemical analysis, molecular dynamics, tribology, friction, computer simulation

The article provides an overview of the methods of automatic abstracting and annotating documents. The description of classification of methods of annotation and abstracting on various criteria is presented. The algorithm of automatic annotation is described in detail, the key step of which is the transformation of all words in the text into lemmas (lemmatization). The developed program sets the upper limit of the output annotation in order to avoid receiving the abstract instead of the annotation.

Keywords: annotation, abstracting, lemmatization, algorithm, software implementation, database, text analysis

The article describes the algorithm of recognition of schematic diagrams in the framework of structural design of complex technical objects. It is specified that at statement of a problem of development of the specialized vectorizer it is necessary to define: software subsystems of the simplest tracer; algorithms of the analysis of images; formats of representation of the end result; initial data (formats) for recognition. As a result, it was concluded that for structural and circuit design, during which the vertex of the final portrait of the graph of the projected system is replaced, obtained after optimization by the criterion of the set of the smallest external stability, it is necessary to recognize images of graphic elements. The proposed algorithm allows for adequate recognition of the elements of electronic circuits, which further makes it possible to automatically replenish the database of elements with new elements in a given format.

Keywords: vectorization, concept recognition algorithm, structural design, graphic, element, raster image, electronic circuits, semi-graphical display, block-the functional distribution of the tracer

The article highlights the use of information technologies in modern education. The opinion of modern didacts has been generalized and presented, and the methodology for presenting information allows the most effective presentation of educational material. The economic component of application of information technologies in higher educational institutions is considered. The peculiarities of the realization of the educational process are considered taking into account the impact of computer radiation on human health. The most important indicators of the effectiveness of the use of information technology are revealed.

Keywords: information technology, distance learning, communication technology, economic component of IT, aim IT, quality

The accuracy of various models used to study inverse saturable absorbers is investigated in this paper. An exact solution of the problem of propagation of laser radiation through a medium with reverse saturable absorption is presented for the case of propagation of light signals with energy equal to the saturation energy in media without relaxation. We consider the case when a pulse of Gaussian shape. With an exact solution, the result of a numerical calculation of the transport equation and Bouguer's law is compared for the intensity of the accuracy realized by different methods of different accuracy. The paper is considered very small extent environment compared with the linear dimensions pulse. Schemes 1-4 of the order of accuracy for these two equations are constructed. For eight different schemes, approximation errors are given. It is shown that already with the use of third-order schemes for a laser pulse of 0.1 J the numerical solution differs from the exact one by only a few nanojoules. Thus, when studying the effect of RSA in large-sized carbon particles, substances where the effect is observed only at energies <1J, the use of third- and fourth-order methods may be unnecessary, especially when using a rather small step.

Keywords: numerical methods, transport equation, approximation, reverse saturable absorption

The article is devoted to the study of foreign methods of waste processing and the use of secondary resources. The article also considers the peculiarities of the countries ' legislation in the field

Keywords: waste, secondary material resources, landscaping, recycling, electrical energy, solid residue, chemicals, leakproofness, incineration, filtration, organic, decomposition, recycling, energy efficiency, emission

The method of parametric modeling and design based on the example of a building is studied, the architectural image of which is a set of circular helical and cylindrical surfaces defined by coordinates through functions of the corresponding surfaces in the SAPPHIRE software. Alternative methods for specifying surfaces in the SAPPHIRE PC, AutoCAD with subsequent export to the LIRA PC for engineering calculations of the frame of the building for various combinations of loads by the finite element method are presented. The object of the study is a 360-meter-high building with a hardness core in the form of a cylindrical shell of revolution. The height of the floor is 3 m. Around the rigid shell there are three circular helical surfaces that "rise" in a spiral upward along with the core of rigidity to a mark of 360 meters from the level of the ground floor. One of the most universal ways to create a surface is to specify it through a formula, because you can easily change the shape and appearance of the surface without manually editing the geometry of the model in the drawing. The development of the parametric architecture calls for the creation of new approaches to the calculation of unique buildings and structures, the improvement of software complexes that implement the finite element method, and the appearance of new varieties of finite elements with curvilinear boundaries.

Keywords: parametric architecture, surface, shape of the object, shell, curve, model, geometry, program, formula surface, helical surface

An experimental device designed for the detection of peripheral veins during the injection and infusion was developed on the basis of recording the difference in the intensity of the optical signal reflected from the vessels and surrounding tissues. The device allows to perform the detection of the locations of vessels, to determine their projection, to confidently distinguish veins and arteries. The effectiveness of the application is shown in tests on healthy people and patients with diabetic angiopathy. The device is very compact, has a simple design and low cost.

Keywords: infrared light, optical pair, photodiode, LED, introscopy, vascular detection, complicated intravenous access, peripheral vein, photoplethysmography, angiopathy

The compare the durability of the existing ball bearings (SHO) with the polymer homogeneous element with the durability of the modified supports, a cell model with the averaged placement of the modifier in SHO substrate and a model for bringing the multilayer sho body to the equivalent single-layer one are constructed; calculations of contact pressure, contact deformations and stresses are performed. The calculation takes into account the rheological and physico-chemical properties of the components of SHO substrate and modifier, the influence of the environment. As a result of calculations, it was found that at all points of the contour the material experiences a biaxial plane two-dimensional stress state, called pure shear with the presence of shear stresses. The most intense point of danger is the point lying in the center of the platform of contact of details.

Keywords: ball bearing, durability, modeling, polymer material, granule, modification

In the article results of approbation of the experimental devices designed for visualization of blood vessels developed by the authors are presented. Experimental device number one is an emitter of infrared light, the experimental device number two is a emitter of visible red light. Devices can be recommended for use in patients with no factors impeding vascular imaging and in patients with elevated body mass index.

Keywords: infrared radiation, optical pair, photodiode, LED, introscopy, visible red light, vascular detection, complicated intravenous access, peripheral vein