The research of algebraic cryptanalysis method was carried out in this work. Systems of the equations for tables of various sizes of nonlinear transformations of substitution for simplified model of GOST28147-89 algorithm are received, also we solve a one of this systems by a XL method. During this work we produced a program, which has realised a generation and solving of system of equations describing nonlinear transformations of substitution. We analysed a nonlinear systems of equations and calculated a value of complexity of XL method for eight blocks of substitution.

Keywords: Algebraic cryptanalysis, XL method, nonlinear transformations of substitution, linearization nonlinear systems, Gauss elimination method, a cryptographic key, GOST28147-89 encryption algorithm

ZnO nanorod arrays have been synthesized on silicon wafers by chemical vapor deposition (CVD) technique with different  temperature modes, without metal catalyst.  With this method   vertically aligned ZnO nanostructures  were grown at the quite low temperatures.  Modification of the method allowed to place silicon substrates in areas with different  ratios of concentrations of the molecules in the vapor phase. Photoluminescence spectroscopy and electron microscopy studies have shown that morphologies and optical properties of nanorods depends on different ratios of concentrations of the molecules in the vapor phase.

Keywords: ZnO nanorods,chemical vapor deposition (CVD), photoluminescence

The arrays of ZnO nanorods were obtained on the sapphire substrates by means of pulsed laser deposition under the high pressure of argon. The conditions of synthesis were optimized, and their influence on the morphology of  ZnO nanostructures were revealed. It is shown that the concentration of oxygen vacancies in ZnO nanorods can be changed by regulation of the synthesis temperature from 850 to 915 °. This process can be controlled by the ratio of intensities of the photoluminescence emission in the visible and ultraviolet regions. So, it allows to create nanostructures for UV photodetectors or chemosensors depending on the temperature choice.

Keywords: ZnO nanorods, laser deposition, PLD, photoluminescence

Features of sampling of the piezoceramic transducer for the arrangement of structural monitoring of water supply systems are in-process observed and calculations of basic performances of the sensing transducer (material PZT-5A) are led

Keywords: piezoceramic transducer, ultrasound, monitoring, structure, extending, water supply systems

The most promising technologies of concrete and reinforced concrete for the underground construction and transport. The studies with the inclusion of concrete and steel and polypropylene fibers. The factors affecting the strength and modulus of deformation materials. The conclusion about the need to study the effectiveness of the concrete with a combined reinforcement.

Keywords: Concrete and underground construction, fiber, strength, modulus of deformation

The author reviews the basic content of  marketing competence in theoretical terms.  The marketing competence includes  situational forecasting orientation for  effective marketing communications building at promoting business services.

Keywords: marketing competence, situationally-future orientation, marketing communications, business, management service

The paper analyzesthe background for innovation policyin catering. The paper studiesthe current situation in the industry of Yekaterinburg, reveals significantfactors influencingconsumer’s choiceof food services,consideringthe latesttechnologicalequipment usedin the industry.

Keywords: food service industry, innovation policy, quality and safety management

The method of application of fuzzy logic to solve the problem of spatial planning using geographic and information systems is described. The spatial arrangement of objects on the map is used as input factors of the solution, to find which a model of the spatial descriptions of objects using a bitmap representation is constructed. The way of formalizing fuzzy judgments about positional relationship of objects and the system of inference making based on the fuzzy logic methods is developed. An example of using the method described in this article to determine the sanitary protection zone of industrial waste landfill in the territory of the Republic of Bashkortostan is given

Keywords: fuzzy logic, geographic information systems, the problem of territorial planning, disposal of industrial waste, protection zones

The work is devoted to the study of algorithms of control subsystem as part of the integrated onboard control system of the aircraft and used in the final part of the trajectory. Algorithms of control subsystems are synthesized on the basis of the theory of optimized delta-transformations of the second order using the principle of the inverted pendulum on a cart. The studies based on the simulation using the developed software model, allowed to estimate as the impact dispersion, and the contribution to it of various subsystems.

Keywords: terminal control, aircraft, on-board integrated control system, optimized delta transformation of the second order, autonomous short range radionavigation system, simulation, software model

In this paper the technology of repair of ground water retaining structures soil mixture improved quality with and without soil mixture install.Use soil mixture , improved sharps and ensure the return of ashes (repaired ) slopes and ridge structures of high strength (up to 13-15 MPa) and water resistance , thus increasing the effectiveness and quality of the repair work and increased resistance to the elements of the structures induced defect . The presence of the bran soil mixture not only enhances the strength of 30-40% , but also gives a significant increase in water and frost (20-30 %), which prevent or substantially reduce the infiltration of water through the filtration body water retaining structures , since high strength and frost soil-concrete being laid on a slope ( in the recovery slope failure ) and groove (at soil dumping and capacity to or in excess of the design marks ) will reliably protect the body of the dams ( dams ) of the drawdown , erosion , buckling , suffusion , and other deformities.

Keywords: technology, dribble feed , soil mixture, sift, cement, fly ash, dam, construction and repair operations, soil mixture installation, factors plan of the experiment, the regression equation

In the article authors examine specificities of internal components behavior changing in fiber-optical cable under influence of strong variable uniform electromagnetic field. There are some process variations proposed for describing of obtained results.

Keywords: fiber-optical cable, electrothermal degradation, kevlar, conductivity, open fiber-optical cable, partial discharges, water treeing

The article describes peculiarities of modern syntax parser systems and problems originating in text analysis. As a result of comparative analysis the authors propose a unified approach to processing of unstructured texts in Russian and English which combines morphology and syntax processing. The developed syntax analysis system, using verbs’ valency dictionary, samples of minimal structural schemes of sentences and samples of conjunctions, allows choosing predicative structures of sentences in the text, realizing initial semantic analysis due to semantic content of predicate’s actants and building trees of syntactical subordination of sentences. The derived trees hold elements of tree of constitutives and tree of dependences. The proposed samples and rules organization allows resolving some of the problems of modern parsers. And the use of verbs’ valency dictionary allows reducing the number of sentences syntax analysis variants.

Keywords: automatic text processing; syntax parser; morphological analysis; structural text elements

The article opens the analysis of a role of factors of production in economic processes. The conclusion that a key influencing element of domination of a factor of production is ensuring competitive advantage with it in production is reasoned. Theoretical justification of influence of a key factor of production on processes of creation and cost distribution is given. Comparison of use of dominating factors of production and their contribution to economic development of the country is given in article. Comparison is given over economically developed countries and Russia. Also researches of innovative development of the countries are given in article, given the International research groups, and the main problems of formation and development of the Russian national innovative system are specified.

Keywords: cost, production factor, cost creation, cost distribution, economic subject, innovations, high technologies

In this work experimentally investigated the possibilities of the new method of obtaining adjustable roughness on metal surfaces electrothermal influence of mobile cathode spots in vacuum arc discharge. Presents the results of processing of various surfaces using this method. Proposed working modes of processing of metal surfaces with the aim to receive as minimum and maximum roughness.

Keywords: roughness of metal surfaces, vacuum arc discharge, cathodic spots

The article is devoted to the system of designing multifunctional reconfigurable intelligent sensors (MRIS), examines results of application of MRIS in development of educational laboratory test benches for monitoring of parameters of environment

Keywords: intelligent sensors, system developing, MRIS, educational laboratory test benches