In accordance with the requirements of Federal Law No. 384-FZ, the safety and reliability of buildings and structures must be ensured. One of the ways to confirm the safety and reliability of building structures is to conduct field tests. The authors of this article have developed a method for full-scale testing of a reinforced concrete beam with a span of 14.52 m as part of a monolithic reinforced concrete ribbed floor. The procedure for testing the beam was drawn up with the development of measures to ensure safety during work, the adjustment of the beam testing method by loading was performed, the beam was tested by loading method with fixation of its deflections, followed by analysis of the test results. The test results showed that the developed method can be used as a full-scale test to confirm the safety and reliability of building structures, namely horizontal reinforced concrete structures.

Keywords: building structures, beam, destruction, safety, methodology, technical condition, field tests

When solving the problem of ensuring the mechanical safety of buildings and structures according to GOST 27551-2014 “Reliability of building structures and foundations. Basic provisions” it is allowed to apply a risk-oriented approach. A mandatory stage of this approach is the forecast of the expected accident risk situation of the facility. Due to the fact that the current regulatory documents on risks do not reflect all the features of the stress-strain state of building structures and foundations of buildings and structures during the operation of structures and, therefore, do not allow for a sufficiently accurate assessment of the safety of structural systems, risk assessment for building structures is a very relevant scientific and technical problem.

Keywords: building, building structures, design, destruction, safety, accident risk, risk assessment, risk management, monitoring and risk analysis

In modern conditions developed and used hydraulic calculation of gas networks program. With them, you can get the pressure value at the nodes of the distribution system of gas supply, costs, and gas velocity in the settlement areas. But do not count in these economic aspects, ie, It is not determined the most economical option, which can be obtained by optimizing the individual characteristics of the gas network. These characteristics in the development of the concept of gas supply is a rational distribution points gas reduction and determination of optimal kolichestva.Priveden calculation of the optimal number of the PWG and the optimal diameter of individual sections of the network of medium pressure gas pipelines to ensure the best economic performance timing system. Defined pressure regulator bandwidth capacity for its stable operation. To determine the effect an increase in the inlet pressure on the diameter of the pipeline.

Keywords: optimum range, the optimum load, optimization of pressure, the diameter of the gas-supply circuit, the hydraulic calculation capacity pressure regulator.

`

Keywords:

Carried out a comprehensive analysis of the factors governing the strength and resilience foams, for the manufacture of foam concrete mixes. Found that lowering the temperature of mixing water helps to improve the structural properties of the foams. 
Keywords: surfactants, foam, lyotropic liquid crystals.

Keywords: