The article is devoted to the problem of radiation security, that must be carried out in the technological process of equipment dismantle of nuclear power plants’(NPP) blocks removed from the exploitation. According to these requirements the structural-parametrical adaptation of technological process should be held during the projecting

Keywords: NPP block, removing from exploitation, equipment dismantle, technological process, radiation security, normative regulation, engineer- radiation inspection, dosimetric control, the procedure of radiation security providing, the structural-parametrical ada

Today’s trend of electronics complicating makes developers to create more complex devices in a shorter time. Developers have to contrive different ways of designing automatization to prevent production worsening. However, automatization cannot improve the situation when an innovative device is developing because such developing involves a lot of testing and researches. In this article authors propose to use hardware in the loop simulation methods to optimize designing process. Hardware in the loop simulation is division the device in functional blocks, some of them are produced as models and other are produced as hardware. Usage of this method decrease cost of modernization hardware blocks and allow using a number of data processing algorithms at the same time.
The article contains a using of hardware in the loop actuality description, main steps of designing enunciation and description of method exemplified by designing of data-measuring and controlling system for automatic orientation of tropospheric communications station.

Keywords: hardware in the loop simulation; data-measuring and controlling system; design of electronic devices; development of electronic devices;

In article the material about use of interactive training programs in educational process of the students training difficult household appliances is prepared. 
Within transition of the higher educational school to provisions of Bologna Process by a leading method of pedagogical work there is a competence-based approach to formation of steady knowledge and practical skills at students [1]. Indispensable condition thus is compliance of quality of training and the general education standard. As especially important requirement continuous control of assimilation of educational information and ability of its application serves in practical activities. The most well-tried remedy of total control of assimilation of educational information is carrying out daily testing, including remote. Use of test interactive programs becomes more actual at integration of groups and increase of an academic load on the teacher [2].  

Keywords: criterion of efficiency, intensity of thermal streams, refrigeration machine, inflow and selection of heat, vaporizer

snowmelter item, thawing, heat balance, thermal conductivity, the intensification of the phase transition.

Keywords: snowmelter item, thawing, heat balance, thermal conductivity, the intensification of the phase transition.

The methods of construction and repair of temporary winter roads, proposed technical solution for creating devices that provide a significant increase in strength, bearing capacity and durability of the repaired snegoledovogo cover winter road at full mechanization of the process of recovery.

Keywords: Winter road, a temporary winter road, moisturizing, repairing, mechanized complex snow mass, milling machine, load capacity

Systems of passive damping of oscillations of high-rise constructions are considered. Their merits and demerits are revealed.  The roller  system of  oscillations indemnification  of the high-rise constructions subject to seismic influence is offered.  The principle of its work is described.  Advantages are estimated.

Keywords: high-rise construction, damping of oscillations, passive systems, roller system of indemnification, vibroisolation

The paper describes the main methods of thermal testing of low-temperature solar systems, a comparative analysis of the complexity and duration of the experiments carried out by various methods; a method for remote monitoring.

Keywords: Low-temperature solar systems, solar panel, solar water heater, thermal tests, thermal performance, quasi-stationary method, method for remote monitoring.

The problem of justifying extending the service life of hydraulic structures in Russia is unsatisfactory condition requiring modernization and refurbishment. Currently in Russia over the length of the river network of 2.37 million sq km includes more than 125 thousand rivers that can be used for navigation. When locking, the most widely found as regulator control structures of low pressure shield dam spillways with metal swivel farms most widely used when evaluating the residual life of structural elements carrying water conveyance structures, has an integrated risk assessment of the accident. According to the distribution curves can be classified technical condition of each item, such as rods and plates in various defects as small and dangerous damage the elements included in the design. During the simulation obtained contour plots of stress-bearing low-pressure water-lifting precast shield dams for subsequent prediction justify continued reliable exploitation. The concept of life extension studies supporting structures prefabricated low-pressure water-lifting shield dams on the example of individual structures bearing elements, prefabricated low-pressure water-lifting shield dams, based on modeling of the loading process from various defects and damage due to prolonged use.

Keywords: water-conducting structures, prefabricated pumping low-pressure-mounted dam, modeling, technical condition, residual life.

This paper is focused on the research of important marketing approach called "word of mouth”. Possibilities of Flocktory as referral marketing tool that has no analogues on the Russian market we studied. Analyzed performance of platform clients. Main competitors, their strengths and weaknesses were defined.

Keywords: Platform Flocktory, referral marketing, advertising, social media, online shopping

The paper presents and analyzes the main methods of material stimulation of engineers and technician staff on russian and partly foreign enterprises, taking into account national management models. The article highlights the indicators that affect the stimulating part of remuneration for different occasions.

Keywords: engineering and technical personnel, remuneration, the stimulating part of remuneration, performance labor.

A stability problem of milling process is under consideration. A novel analytical tool is presented to assess the optimal cutting parameters which provide a chatter free machining. Chatter instability is broadly studied in the literature. However, the problem of simultaneous optimization of radial and axial depths of cut is kept out of scope. To describe the optimization method a single-degree-of-freedom model of milling process is investigated as well as corresponding equation of motion and function of cutting force. A unified delay-differential equation is proposed. A theorem of asymptotic stability is suggested. Suggested optimization technique allows to create a diagram of radial and axial depth-of-cut dependence.  As shown, there exists an extremum of function of axial and radial depth-of-cut dependence.  

Keywords: chatter, stability, delay-differential equation, oscilations, self-excited vibrations, optimization

In this work new circuit solutions of R-S-latch and D-trigger having nonvolatile electrically programmable memory and nonvolatile shift register are presented. It shows that nonvolatile R-S-latch can be effectively used as a memory cell and simultaneously as write and read circuits for it, thus it makes possible to increase reliability of read operation from EEPROM at the expense of differential read for every bit.

Keywords: CMOS, R-S-latch, D-tirgger, shift register, EEPROM, nonvolatile memory

Reviews the basic contents of diversification of thermal power plants, which will contribute to improve environmental and economic performance in the industry.

Keywords: diversification, enterprises of power industry, enrichment of coal, ash dumps, pollution, species blade, air pollution, ash, slag ash, secondary resources.

With the growing fleet's increasingly acute problem arises safety and reliability their exploitation as a result of this increase in productivity and accuracy of their technical diagnostics. Urgent task to further improve diagnosis for vehicles is to develop new methods and algorithms highlight the dominant component of the information in relation to a wide class of vehicles. The methods joint time-frequency and wavelet analysis. To isolate the dominant component of the information proposed to use the method of wavelet decomposition. Using vibro acoustic registration nodes vehicles funds allowed to receive signals carrying information about the defects of individual units of vehicles. The proposed decoding algorithms signals have high reliability, allow technical inspection, subsequent monitoring of the technical state of the vehicle. Using vibroacoustic registration of vehicles allowed nodes receive signals carry-ing information about the defects of individual units of vehicles. The proposed decoding algorithms signals have high reliability, allow technical inspection, subsequent monitoring of the technical state of the vehicle.

Keywords: vehicle, vibroacoustic diagnostics, dominant information, time-frequency analysis, wavelet analysis

The composite cathode material of the core@shell type with the LiMn2O4@LiCoO2 formula of has been successfully synthesized using the solid-state reactions in several stages. Its structure has been studied by means of X-ray diffraction, scanning and transmission electron microscopy and vibrational infrared spectroscopy. Electrochemical investigation in two-electrode cell has been showed improvement of characteristics of the synthesized cathode material than the constituent components. The specific power of LiMn2O4@LiCoO2 is 650 mWh/g, against 450 and 500 mWh/g for LiCoO2 and LiMn2O4, respectively.

Keywords: lithium-ion batteries, cathode materials, Delafosse, X-ray structural analysis, electron microscopy, electrochemical properties