his paper presents mathematic model of logging timber freights by combine transport network. This model optimize of cargo-carrying and technological roading of forest bases in timber procurement enterprise and lumber factories. Authors developed procedures and functions, which allowed solving optimization of cargo-carrying and technological roading of forest bases in timber procurement enterprise and lumber factories. Authors also analyze technological process on cut-over land, loading bay and railheads. This reporting allows to reduce transport costs and makes optimal schedule of logging timber freights.

Keywords: log truck, rail transportation in timber processing complex

The subject of the article is a two-level optimization system of thermal processing of pellets mode within an automated control system of technological process of a horizontal-grate machine. At the top level the problem of the static optimization of the mode is solved periodically  based on a  mathematical models of a technological zones. At the bottom level, the pellets layer's immeasurable parameters are estimated with a help of a state observer and the optimal thermal processing mode is being stabilized.

Keywords: horizontal-grate machine, mode optimization, mathematical model, state observer

The urgency and feasibility of application of biosensors with active biological layer for environmental studies was justified. A study of biosensors of various configurations to build a test system of environmental pollution control and determine the degree of aquatic toxicity was conducted. A simulation model of biosensor system was built. The selectivity of the biosensor was determined by theoretical experiments in which the analytical signal of the biosensor for biologically active layer without other biologically active substances was determined. The relationship between the type of transducer and biologically active substance was revealed. The software implementation of bisensor system was developed that reveals a number of pollutants and allows using not only different converters, but also different strains.

Keywords: biosensor, strain, quartz crystal, simulation model, environmental studies, pollutants, toxicity, sensitivity

This article is devoted to reviewing of crusted composition, based on natural minerals: magnesium chloride (bischofite) and glauconite, as a method of providing an ecological and technical security at traffic areas. In one of the main parametres of road safety - the coefficient of coupling revealed the advantages of using of eco composition over other commonly used anti-icing agents.

Keywords: crusted eco composition, icemelter, coefficient of adhesion, accident rate, ecological security, technical security

Одним из важнейших факторов, исключающих возникновение дефектов типа пор, расслоений, участков с неполной полимеризацией связующего в формуемой высоконагруженной полимерной композитной конструкции, является управляемость процесса во всем объеме композита. Для обеспечения однородности процесса полимеризации связующего предложен метод многокритериальной оптимизации процесса на основе математической модели, связывающей процессы распространения тепла и кинетики полимеризации. Система связанных уравнений процесса, учитывающая экзотермическое тепло, выделяемое при полимеризации термореактивного связующего, изменение теплоемкости и теплопроводности композита при фазовых переходах от жидкого к гелеобразному и, далее, к твердому состоянию, точную геометрию технологической системы, включая прессформу, а также интенсивность тепловыделения независимо управляемых нагревателей, реализована в виде конечноэлементной модели. Предложенный метод синтеза закона оптимального управления нагревателями, использующий метод множеств Парето, проиллюстрирован на примере полимеризации разностенной композитной конструкции, формуемой из стеклопластика.

Keywords: Композиционные материалы; Процесс полимеризации; Оптимальное управление; Кинетические уравнения; Уравнения в частных производных в задачах управления и оптимизации, Конечно-элементное моделирование, Фронт Парето

The results of a patent search in the field of shut-off valve constructions for nuclear power plants, thermal power plants and main piping are given.

Keywords: Nuclear power plants, shut-off valve, construction, main piping

Following ways to increase the competitiveness of energy biomass are defined. The research of biomass as a raw material for logging and utilization, state encouragement of its industrial utilization, analysis and biomass supplier and customer market grouping, making of effective equipment for its logging, transportation and utilization, feasibility study of equipment parameters and modes of operations, energy biomass performance improvement.

Keywords: alternative fuel,energy biomass, biofuel, logging, competition

This article considers the causes of halitosis and methods of the diagnosis. Halitosis, syndrome of bad breath caused by pathological condition of the oral cavity or internal organs and systems, has a significant impact on the patient's social life. Analysis of the composition of exhaled air may become a promising way to diagnose halitosis, as the direct relationship between the compositions of molecules of oxygen, carbon dioxide, nitrogen oxides, ammonia etc. and the causes of halitosis were found. The article's authors review and analysis the methods of measurement of qualitative and quantitative composition of exhaled air. The most common methods include the use of electrochemical, optical sensors, infrared spectrometers and mass spectrometers. The latter method is positioned as the most optimal method of analysis of exhaled air due to its high accuracy, selectivity and sensitivity. The authors' portable mass spectrometer being developed is represented. At this stage it can detect traces of oxygen and carbon dioxide, which inject into the device through the capillary system or membrane one, in gas samples in real-time mode.

Keywords: diagnosis of halitosis, molecular biomarkers, analysis of exhaled air, portable mass spectrometer

Results of comparing the beamwidth and the concentration factor of receiving antenna wich were calculated using the metods of Bartlett and Prony when working on the background noise of the sea are considered. It was shown that efficiency parameter estimation signal sources using Prony methods is higher than when using the method of Bartlett.

Keywords: Prony algorithm, vector-scalar array,dynamc sea noise, the covariance, the flow of power

The article has received the further development of application technologies autonomous scripts for management of information resources of computer systems. Formalized behaviour of deterministic and stochastic autonomous scripts with the use of finite automata that enables you to develop models and technology for solving a wide class of problems of information resources management.

Keywords: autonomous scripts, theory of finite automata, the concept of frames slot, management of distributed information resources

Possibility of receiving lungs self compacting concrete is considered. The technique of a choice of components of a raw mix is offered and are brought physics - mechanical characteristics of a ready construction materia  

Keywords: Self-compacting concrete, the supersoftener, knitting, filler.

A mathematical model of heat transfer processes, the discrete model is based on the finite difference method, and the results of calculations of the temperature distribution also will be developed. In addition the program was created which allows to calculate the distribution of temperature over its entire length for given values ​​of insolation, ambient air temperature and air velocity inside the collector  

Keywords: mathematical modeling, finite difference method, heat transfer processes, solar collector

The item under consideration is the possibility of implementing into the educational process for students of architectural departments a space-composition modeling of module origami as a mean that shows visually the interaction between the fullerene structure and the fractal principle of development for natural and geometrical objects and architecture.

Keywords: professional education, space-composition modeling, modular systems, architectural design, fractal, fullerene, module origami

In article it is briefly considered stages of formation of definition of strategic marketing in scientific literature of Russia. The importance of a services sector in economy and the importance of modernization of the given sphere for the general development of economy as a whole locates. The analysis of dynamics of paid services to the population that will allow to reveal the sphere of servants with the greatest volume of consumption among the population is carried out. Are considered the sphere of transport services of the Rostov region, as a result of research SWOT analysis of marketing strategy is carried out to projections to the sphere of transport services of the Rostov region and recommendations to transport companies of the Rostov region for a choice of suitable marketing strategy are made.

Keywords: diversification of management, production diversification, financial and economic purposes of a diversification, technological purposes of ensuring flexibility of production

 An analysis of new methods and means for a mesurement of parameters of piezoelectric ceramic elements and materials is carried out. These methods and means are based on a digital principle of the construction of devices. An impuls with a linear frequncy modulation therein is used as an signal for exciting. Results of experimental studies on this subject are represented for discussion.     

Keywords: piezo ceramic element, piezo, methods and means of measurement, digital signal processing