Discusses various aspects of ensuring effective functioning of the enterprises of the fuel and energy complex. The substantiation of the composition of resources, groups of indicators to assess the efficiency of the fuel and energy complex enterprises. Justified types of resources, define technical and socio-economic development of the enterprise. The author proposes to the elements of production include indicators reflecting the quantitative and qualitative composition of the means of labor, subjects of work and technical equipment. Justified measures on the creation of an interconnected system of indices, which will analyze the changes in the industry with the purpose of planning and realization of actions aimed at sustainable development of the industry in the future.

Keywords: fuel and energy complex; resources; enterprise; sustainable development of the power industry; the effectiveness of the functioning of the fuel and energy complex

This article provides an account tsentrenno and eccentrically compressed reinforced concrete columns of high-strength concrete on the deformed pattern in SP 63.13330.2012. Compares the results of the calculation of the bearing capacity of the columns with the set experimental data. Proposed adjustments in the form of the coefficients in the formulas for the curvature tsentrenno compressed columns j and eccentrically compressed yb.

Keywords: high-strength concrete, physical experiment, prism strength, lateral reinforcement, concrete counters, deformation correction factor

In article statistical data on failures on a linear part of the main gas pipelines are presented, the reasons of their emergence are defined. Standard scenarios of development of emergencies are provided, and also the basic principles of determination of frequency of emergence of failures are shined.

Keywords: accident, analysis, diameter, linear part of the main gas pipelines, depressurization, scenario, pipeline.

The composition, basic properties and application scope of the two main types of expanding binders historically most widespread in Russia such as gypsum-alumina expansive cement and expansive cement Type M are given. The expansion kinetics of the binders ranging from gypsum-alumina expansive cement to expansive cement Type M is observed. The role of lime as a supplement and as a hydration product of the Portland cement in the expansion process is shown: as a supplement in small values (2-4%) to gypsum-alumina expansive cement with higher gypsum concentration stabilizes the hardening and expansion process, in higher values boosts the expansion process to self-destruction. Optimization criteria of the expansion kinetics aimed at obtaining project expansion in 10 days of hardening without any additional chemical additives are proposed.

Keywords: gypsum-alumina expansive cement, expansive cement type M, expansion kinetics, lime

The issue of increasing the strength of cutoff and grooving tools is considered in the paper. The principle of strength balance of edge is offered to be used in designing the replaceable inserts. The calculations are made and the shape is designed for the strength balanced front surface of the cutting tools. The analysis of the received data is made and the regularities of the designed shape of the front surface of the cutting edge are established. Designs of replaceable cutting inserts made with a glance to structural characteristics and operating conditions of the cutoff and grooving tools are offered.

Keywords: strength, cutting end, strength balance, cutting end, cutoff tools

The paper considers the comparison of power consumption of Two’s Complement System and Residue Number System for digital signal processing applications. The comparison of these two implementations allows to conclude that, for these applications, the RNS uses less power than the TCS counterpart. The aim of the present paper is to highlight the reasons of this power consumption reduction.

Keywords: residue number system, digital signal processing

The article is devoted to the formation of scientific and methodological basis of socio -ecological and socio-economic risks that arise in urban areas in the process of realization investment and construction projects for the development of the urban environment. The authors identified the contradictions economic substantiation of development projects of territorial development and socio- environmental factors, the adverse effects of their realization, on the basis of which concluded the need for modernization of the basic principles of risk management for sustainable development of urban territories . The article proposes a set of principles that are required for the formation of an effective system of risk management of investment and construction projects of development of urban territories, which includes five interrelated principles : the principle of the matter of feasibility activity, the principle of optimization of protection, the principle of an integrated estimation of the danger, the principle of ecosystem sustainability, the principle of "the polluter pays". The proposed principles will gain the efficiency of the analysis and selection of projects for realization only able to provide the highest level of security and stability of the socio- economic sector of the city.  

Keywords: principle, the system of governance, risk, investment and construction projects, urban territories, sustainable development, social and environmental security

В данной статье приводятся примеры стандартных и не стандартных точек контакта с потенциальными клиентами, описаны механизмы их выявления, а также приведены примеры из практического опыта работы авторов по данной теме. Дано определение понятию «клиентоориентированнсть» с точки зрения клиента, и предложены варианты, где применима данная стратегия. Поднят вопрос о качестве обслуживания и что стоит за этим пониманием для клиента, чего он ждет от сферы услуг и на что рассчитывает. В статье рассмотрены этапы анализа точек контакта, приведены примеры влияния этих точек на формирование лояльного отношения клиента к качеству услуг. 

Keywords: услуга, точки контакт, идентификация, стратегия, анализ, клиент, потребитель, контакт, точки взаимодействия, ориентация на клиента

The problem of synthesis of management by spatial orientation of GSP realized in real scale, its spatial situation providing high-precision definition in conditions of action of hindrances is considered.

Keywords: the inertial navigation system, the gyrostabilized platform, optimum control

This paper presents a comparative analysis of the effectiveness of the method Cuthill-McKee algorithm and fill-reducing ordering of a sparse matrix, based on multi-level nested dissection paradigm, developed at the Department of "Computer Science and Engineering," University of Minnesota. For short, we shall call the algorithm Cuthill-McKee CM, and the algorithm of the University of Minnesota — NodeND (Node nested dissection). This article uses a modification of the CM algorithm — RCM (reverse Cuthill-McKee), because in practice the reverse numbering index allows you to get a greater advantage than using a direct algorithm CM. The reason for using these algorithms are high speed computational algorithm, as it is necessary to solve the system proximal to the diagonal, the great acceleration of algorithms for solving FE problems using technology such as CUDA  

Keywords: finite element mesh renumbering methods, three-dimensional mathematical modeling, elasticity theory problems, finite element method, finite element meshes

the analysis of foreign researches, which consist of processes of functioning timber lorries is given. Decrease transport expenses with minimization of empty run of timber lorries and formations of rational structure of this park has been proved.

Keywords: timber lorries, functioning

The nano-catalyst ceria (CeO2), activated by Pt nanoparticles, is known for being prospective and efficient material widely used in catalysis, fuel elements, and sensors. One of the most up-to-date methods of catalysts' reasearch is X-ray absorption spectroscopy (XAS) that is sensitive to the chemical state of catalyst's active centers [1,2]. Using XAS in the fluorescense detection mode at CeL1 line with high precision we studied electronic structure of Pt-activated nanoparticles of ceria at various redox conditions. In order to detect partial X-ray fluorescence yield the emission line CeLγ3 was used, which allowed us to increase spectral resolution. We researched local atomic and electronic structure of the materials under study. Oxygen vacansies were found to appear on the nanoparticles surface of ceria at 5% CO He atmosphere. Theoretical modeling of the obtained spectra at CeL1-edge demonstrated good agreement with experiment.

Keywords: X-ray absorption spectroscopy, HERFD, XAS, Ce-based catalysts, oxygen vacansies

A comprehensive analysis of the trend indicators moving averages (simple – MA, exponential – EMA moving average convergence-divergence – MACD). Used data from the site of Forex (FX) for the period from 21 July to 21 October, 2013. Computing scheme is implemented in the mode of conservative scalping trading system unveils new profitable intraday trading system for the forex market Forex.

Keywords: Trend indicators, moving Average, simple average, exponential Moving Average, moving average convergence-divergence, trend, short-term trend, period, a short period, long period, conservative scalping.

Only innovative activity is able to unite all aspects of science, equipment, economy, business and management. The current state of the innovative sphere of Russia speaks about serious contradictions in its functioning. Considerable scientific and technical capacity of the country was lost in the period of economic reforms. Now often it is impossible to predict precisely succession of events in economic life of the country generally and each organization separately. In modern conditions scientific and technical progress represents innovative development which is defined by the state as the most important priority of economic policy. Innovative potential of any managing subject needs to be estimated as difficult social and institutional system. To encourage managers and the production personnel competently developed motivational strategy is necessary to conduct work on search of innovations. Achievement of the put indicators of innovative development of the Rostov region and the country as a whole has to become result of an offered method of interaction of science, business and authorities.

Keywords: innovative activity, scientific and technical potential, economy, business, ideas, effect, development

"This article is devoted to the development of the method for modeling elements of microsystems technology(MST) of membrane type. In this paper perforated membranes are considered and the impact of perforation on the mechanical properties of the membranes is examined. In numerical simulations of the elements it is proposed to use the equivalent mechanical parameters of perforated membranes obtained at the initial stage of the simulation. This will allow to obtain find the optimal parameters of perforation, reduce the time and resource modeling of MST elements. To test the technique numerical experiments were conducted for the two square membranes with sides 1.5 and 3 mm fixed on the contour of the same thickness. We studied the influence of the size of the perforation on the equivalent Young's modulus of the perforated membrane. "

Keywords: microsystems technology, numerical modeling, perforated membrane