The article discusses topical problems of labor safety and health of construction workers. The analysis of relevant information, identified the main areas of work in the field of increasing the efficiency of labor.

Keywords: organizational management, organization building, enterprise management, labor protection

The article is devoted to the application of unmanned aerial vehicles to obtain the operational information about the status of oil trunk pipelines and areas along them. It is dealt with some of the problems that arise during the operation of the branched trunk pipeline systems. It is described in short the existing methods of monitoring pipelines and disadvantages of their use. The paper proposes the introduction of unmanned aerial vehicles to solve the problems. It is spoken in detail about the main advantages and the characteristics of various types of UAV. The text describes some of the tasks that can be solved with the help of several types of shooting. Also, it is shown a matter of choice between creating its fleet of drones and purchase of services from third party companies. In conclusion, the article points out that use of unmanned aerial vehicles for monitoring of oil trunk pipelines saves money and opens new possibilities for the safe operation of pipeline transport.

Keywords: UAV, unmanned aerial vehicle, drone, monitoring of pipelines, oil trunk pipeline, pipeline transport, technology and organization of construction, oil and gas complex, innovative technologies

considers the questions of improvement of road winter road Bilibino – Anyuisk held in the area of Bilibino. On the basis of the calculations for modeling correspondences and intensity of movement of motor transport on the roads on a 20-year term.The calculations of the volumes of freight and passenger traffic calculated annual mean daily intensity and composition of motor traffic for the year 2016 and the forecast for 2020 and 2030 for the construction of corrugated metal pipe of large diameter with approaches across the Creek Midday on 150 km of an improved winter road with an extended period of exploitation Bilibino – Anyuisk also given in the article

Keywords: construction, automotive, station, passenger transport, winter road, the length, zoning, space, roads, Chukotka

"One of the major drawbacks of modern alloyed metal cathodes Pd-Ba is the inhomogeneous distribution of the intermetallic Pd5Ba in the matrix Pd. This fact leads to an underestimation of life and technical performance of devices of microwave electronics on the basis of the cathodes. A substantial improvement in uniformity of cathode alloys Pd-Ba should lead the operation of mechanical activation of powder Pd, carried out prior to its compression process. The paper studied the effect of mechanical activation on the particle shape, particle size distribution and dispersion of powder Pd. It is shown that mechanical activation results in a substantial reduction in the average size and average particle size of Pd powder, as well as a substantial increase of the specific surface of the particles. The optimal regimes of mechanical activation of powder of Pd with a view to its use for metallosplavnyh cathodes."

Keywords: alloyed metal cathodes Pd-Ba, mechanical activation, dispersion, particle size distribution, average particle size, surface area, the emission properties

The article presents the results of the analysis of the fluctuations of the USD/RUB and the definitions of integrability of the corresponding time series. The research of currency pair by linear methods revealed the presence of non-stationarity in the behavior of the time series, as a result we came to the conclusion that it is impossible to create a high-quality predictive model based on parametric methods.An attempt was made to improve the quality of the forecast to study the integrability of the time series. For this purpose we used various modifications of test the Dickey–Fuller and software products. We tested estimate the order of integrability of two economic time series ,characterizing fluctuations of the U.S. dollar against the ruble and the dynamics of the stock of the Sberbank. The results of the analysis prove that the Dickey-Fuller test is a simple and reliable way to assess the order of integrability of the time series. The benefits of the ADF-test before DF-test are identified.The result is a stationary model of time series , which we can used for forecasting.

Keywords: time series, the main hypothesis, alternative hypothesis, Student criterion, stationarity, nonstationarity, integrability,the test for unit root, the Dickey-Fuller test

The paper proposes a modification of earlier mentioned method reduces the number of computing operations and improve the accuracy of estimating the phase shift, which is close to the limit set by the Cramer-Rao inequality. The article also presents the results of numerical modeling of systematic and random errors parametric estimation of the phase shift angle of the proposed method.

Keywords: phase shift quasi-harmonic signal, Cramer-Rao lower band, parametric method

The analytical assessment of change of office properties of heavy-duty details of friction pairs of the cart of the freight car on the first depot repair is presented. The technique of definition of iznos of details of the cart is applied to determination of faults. The most subject are shown to defects nodes of the cart of the freight car.

Keywords: cart of the freight car, frictional wedge, cap of a skolzun, thrust bearing disk, frictional level, wear, wear resistance, defects of the cart of the car

The paper presents a method for creating model for combinational circuit implementation in FPGA basis, through its original description. This model represents the equivalent circuit of the FPGA logic elements. The scheme can be used for the calculation of various parameters such as speed, area, power consumption etc. The paper proposes to use this model to assess reliability in relation to the single fault in combinational circuit’s parts or the configuration registers. Furthermore, the resulting equivalent circuit can be modified and re-synthesized in the CAD environment to achieve high levels of resistance to a single event upset. Direct estimation of the masking properties of the logic circuit through its original description is impossible because of substantial change in the structure due to the synthesis process. Evaluation of fault tolerance after place and route is not available due to lack of the necessary tools in modern CAD (Altera Quartus II, Xilinx ISE, Synopsys Synplify). To evaluate the reliability of the project one must create custom FPGA netlist analysis tool and tools for modeling combinational circuits.

Keywords: reliability evaluation, re-synthesis, combinational circuits, FPGA, fault injection.

Abstract: To analyse the absolute stability of nonlinear impulsive systems are proposed recurrent mathematical expressions derived from the criterion of absolute stability and allows by means of the developed program to determine the coecients of a special polynomial obtained from the transfer function of a nonlinear pulse system of any order. The technique of checking the strict positivity of the obtained polynomial (which is analogous to the characteristic polynomial of the system) the signs of the determinants inerney matrix and thereby detect the absolute stability of the system. Determinants of innoref are computed by an efficient algorithm for double triangularization, giving the win to 2 – 4 times compared to the classical algorithm of Gauss

Keywords: nonlinear pulse systems, the calculation of the coefficients of the polynomial, the construction innerы matrices, determining the absolute stability of the signs of the determinants of Insarov.

According to meteorological studies found natural growth of air temperature, coincident in timing with the beginning of a geomagnetic storm. The data were analyzed according to the temperature of about one hundred meteorological stations. Based on this analysis, it was established phenomenon of short-term (30-60 min) growth of surface layer air temperature during the beginning of the magnetic storm, the detected azimuthal drift of the temperature gradient after the start of geomagnetic storms

Keywords: the low-latitude thermosphere, geomagnetic storm, temperatura air, temperaturny gradient, growth temperature

Effective application of parametric radiating arrays for detection of objects, buried in bottomsediments, are caused by their possibility to form directed radiation on low frequencies with small initial dimensions. Unlike water, bottom sediments are the environment in which both longitudinal and shift making speeds of acoustic fluctuationsdistribution are presented. Presences of several speed components in bottom sediments give the opportunity toparametric radiating array to generatethe acoustic waves of various types. In given paperthe results of theoretical and experimental researches of the field, created by the parametric radiating array in the multiphase environment «water – bottom sediments» at inclined falling on boundary surface under angles relative to critical are described. It is shown that the longitudinal pump waves, generated in water, and waves of differentialfrequency (DFW) in bottom sediments (BS) are transformed to corresponding shear waves. Besides, because of imaginary passive arrayon boundary surface, the generation of shearedDFWoccurs in BS. Researches were carried out in laboratory hydroacoustic tank. Clay and sand were used asa sample of BS. On the base of time marker the shear DFW in various typeof sediments were allocated. Using obtained theoretical model the basic characteristics of theparametric array in BSwere calculated and experimentally confirmed whileshear DFW excitation.On the results of theoretical and experimental researches, it is proved that transformation, excitation and generation of the shear waves formed by the passive array take placein BS. The results received during research give good coincidence between the theory and practice that illustrate the correctness of the model choice. Besides, experimental results on use of shearDFW in BSfor echo sounder mode are presented. Thus, given method can be used in parametric sonars for BS stratification TO and detection in them of the various alien objects.

Keywords: parametric array, nonlinear interaction, bottom sediments, shear wave of differential frequencies, critical angle

A problem characterizing dynamics of social development is discussed in this article. The problem is the modern lifestyle. An ability to adapt to changes in the surrounding world, interacting with him is very important for the existence of any living organism. In connection with the ongoing high-quality socio-cultural changes the problem of the lifestyle is becoming challenging in modern world. The category «lifestyle» is revealed as a comprehensive characteristic of human activity in today's evolving institutional transformation. The aim of the research is to study the problem of living in the modern world from the standpoint of social philosophy. The reasons for increased attention to the problem of lifestyle, the content of the category «lifestyle», the relationship category «lifestyle» with the spheres of social life, actualize the transition to healthy lifestyles and the need to create a culture of health of the person are studied. Lifestyle is analyzed as a complex integrative characteristic of human activity, reflecting the balance of the individual interactions in the system – the world around us. The ability to implement healthy lifestyle and enhancing vital resources affects the success of the person’s life. The necessity of developing the concept of «lifestyle» is settled, as well as options with the greatest impact on the lifestyle of modern man. In conclusion the need to strengthen the social health of society as a whole, creating a culture of health in order to optimize the interaction with the environment is pointed out.

Keywords: lifestyle, healthy lifestyle, health culture, social health, social environment, social philosophy

In the modern world required the restructuring of human interaction with nature. Foundations of the unity of man with nature should be put into the period of his education, training and professionalization. Formation of ecological culture includes the knowledge necessary to solve problems of safety and environmental protection industries; environmental awareness; environmental behaviour. In our understanding of the ecological consciousness of the personality is the realm of individual consciousness to reflect the environmental reality in the form of environmental knowledge, views, evaluation of relations to nature and practice of protecting her, regulating human behavior in the natural environment. Formation of ecological consciousness of students of a technical College based on its evaluation of the developed technological processes, structures and systems from the point of view of rational use of raw materials, electricity, the issues of likelihood of contamination of the atmosphere, hydrosphere, soils in the production process of the developed device, the design of the system; the application of engineering solutions for the protection of the environment, including not only the techniques, methods, apparatuses or systems of air purification and waste water, but also low-waste and wasteless technologies to reduce or eliminate the amount of harmful emissions; projected utilization devices, structures, systems after the development of its resources and decontamination of waste; the use of environmentally friendly technologies. On the basis of analysis of structure of formation of ecological culture is closely connected to its environmental consciousness, environmental responsibility and environmental experiences that influence the use of natural resources, both at global and at regional and local levels of the system. Formation of ecological culture of a person allows to optimize human interaction with the environment, helps to restore inner harmony of personality and its interaction with the surrounding society.

Keywords: Environmental education; environmental awareness; environmental behavior; environmental awareness; environmental responsibility.

In article the hardware-software complex created on the basis of widespread software products is considered. The environment of programming of LabVIEW is used. Results of the pilot studies conducted by means of the developed complex are presented.

Keywords: hardware-software complex, LabVIEW, piezoceramic element, the frequency response of conductivity

In the article the question of the distribution of the load factor of a synchronous generator, which determines the percentage of the PTO on the particular consumer generator. When transporting the electricity consumers on several lines from different energy sources, there is a problem of rational distribution of power level that the consumer will take from each of the sources. This paper proposes a method of allocation, which aims to minimize power losses in power lines. Disabled distribution law SG load factor, which takes into account line losses and possible limitations on the level of generated power generators.

Keywords: the load factor, synchronous generator, control system, smart grid, power distribution.