The model of areas fire safety effective management taking into account real condition of the housing fund is develop dint his article by its authors. This model allows evaluation of the urban a reconstruction objects fire safety on the basis of the index method. The developed methodology makes the housing fund objects technical condition analyzing and their classifying according to the fire safety index possible; moreover it helps to emphasize the areas on the territory of municipality. The model includes a number of recommendations and fire prevention measures aim edatin creasing the level of fire safety inurban areas.

Keywords: urban areas, housing fund, methodology, fire safety, technical condition

  Due to the increasing requirements of modern building materials increased interest in energy-efficient building materials. The dependence of the viscoplastic properties of slurries for foam concrete production on the composition and properties of the components of mix. To determine the regulatory properties of cement-sand slurries should consider the state of the water in a dispersed system.

Keywords: Foam concrete water content, water forms of communication, water retention of cement and sand, formation of foam membrane

  In article are offered results of research of sinter ability clayey silica clay. It is shown that the ceramic shard based on the silica clay have a low average density, increased firing shrinkage, porosity and water absorption. Increasing the firing temperature to a large extent determines the increase in shrinkage and reduced water absorption. At least increase the density. The data presented in the paper can be a useful technology of brick factories, employees testing laboratories and design companies, geologists studying nonmetallic raw materials, as well as undergraduate and graduate students specializing in this field.

Keywords: Silica clay, sinter ability, average density, water absorption, temperature, raw material

  The paper presents the results of a study of powdered ceramic materials based on silica clay the production of bricks method of compression molding. It is shown that the press powders based on silica clay pressed in a wide range of moisture content, the maximum compatibility in terms of the solid phase is achieved at a certain humidity in the range of 15–30 MPa compaction pressure (depending on the type of molding boxes and humidity), the density of compacts in terms of solid phase begins to exceed the average density of the material (density in the piece), for pressing molding powders with a moisture content below the optimum, almost regardless of the specific pressure extrusion, different-density compaction can reach 4–6%.

Keywords: Silica clay, compressibility, moisture, pressure, density, press powders

  In article are offered the main problems arising at release of a figured brick are shown and versions of their decision. Prospects of production of a figured ceramic brick on the basis of siliceous breeds – silica clay the description of technological decisions is given by production of products by way of compression formation. Offered classification of a figured brick by a form and appointment, and also design of the most demanded forms of an obverse brick is given.                                                                          

Keywords: Figured brick, silica clay, form, pressed brick, production process, design.

  The article shows that the viscoelastic behavior of polymers is well described by a nonlinear generalized Maxwell equation, generalized Russian scientists GI Gurevich In this paper, based on the results of experimental studies of the isothermal relaxation of thermal stresses presented a method to determine the relaxation parameters of the equation. The experiment was carried out on thin-walled tubes, with rigidly clamped ends. Heating or cooling from initial temperature to a final temperature (the temperature relaxation time) was carried out at a constant rate of heating (cooling) in a linear fashion. This work shows that the linearized theory does not give correct results.

Keywords: Thermal stresses, the Maxwell equations relating the parameters, isothermal relaxation

Solving the problem is a strong dependence of physical and mechanical properties of the polymer and the relaxation of the temperature. Significantly affect the time within which the rod is able to maintain a stable position.
For example, the rod loaded with only 57% of the Euler force, loses stability at a temperature of 40°C is about 15 times faster than at 20°C. Thus, to fully exploit the potential of polymeric material to protect it from the effects of temperature.

Keywords: thermal loading, stability, algorithm, approximation

  Given technological regime layering film coating on the paper.A significant change in the properties of the composite material at deviations in the mode of layers of film. The data testifies to the fact that a change in the regime of film layers, causing a deep penetration of the polymer in the paper and a violation can nolitnosti-coating reduces the strength of the resulting complex.

Keywords: film stratification on paper, durability on a break, composition paper basis, temperature, time

  Based on equilibrium equations of a shell element for the membrane theory and continuity equations of its middle surface to derive relationships between the components of the surface load in the shells of revolution. These relations are convenient to go to special cases of shells of revolution in their original ax symmetric subcritical state.

Keywords: rotation cover, bezmomentny condition, components of superficial loading

  Given the task of calculating the stresses in the radiation-thermal plant screen. This design, also known as «dry protection» is intended to reduce the effects of radiation and heat, generated in the reactor. A significant redistribution of stresses due to changes in elastic modulus due to the above effects.

Keywords: thermal loading, loading of radiation, the calculation of protection for accident-mode for trouble

  Petro graphic analysis of the structure of foam concrete, reinforced with glass dispersion and synthetic fibers showed that the real nature of the fiber controls the parameters of their structure and strength.

Keywords: fiberfoamconcrete, structure, form pores, fiber, strength

  In article negative influence of polymeric construction materials on a human body and surrounding his environment is shown, and also results of earlier carried out tests are given. The construction material – fiberfoamconcrete, which proved as a material possessing low heat conductivity, at the expense of strong porous structure of mezhporovy partitions is revealed modern constructional and heatinsulating.

Keywords: fiberfoamconcrete, polymers, heat insulating materials, fire safety, construction materials

  Article is devoted to studying of principles of modeling of administrative decisions directed on decrease negative influence of risk-forming factors in the course of formation of the strategic directions of the development of urban areas. Principles of sustainable social-ecological-economic development of territorial systems which are a fundamental basis of economic tools of development of economic planningof control action on the risk forming factors are examined. The economic-mathematical mechanism of selection and adoption of the most effective decisions on risk management of development of urban areas on the basis of the models "expenses benefit", "risks benefit" to "efficiency of expenses" is suggested.

Keywords: modeling principles, risk management, sustainable development, urban areas

  Article is devoted to transformation of the concept of a risk management to the tasks of management by development of city territorial systems. The generalized schematic structure of risk management of development of the urbanized territories is considered. Need of the accounting of economic, ecological and social consequences of administrative decisions in the course of realization of strategy of development of territorial systems is substantiated. The mechanism and algorithm of formation of predictive integratedestimateof quality social-ecological-economic system as a result of realization of strategy of the development is offered, allowing essentially to reduce quantity of analyzed options of operating influence.

Keywords: development management, territorial systems, risk concept, risk management, integrated estimate

  The results of experimental studies of a radial fan, built a complete characterization on the basis of the data listed in the table confirm the theoretical concepts and calculations. Goal is to determine the total pressure created by the fan, its supply and power consumption for each test mode. Designed and built the experimental setup, the department "Electrical Engineering and Automation" RGSU, which is designed for aerodynamic testing of the fan,

Keywords: centrifugal fan, a complete characterization of the fan, flow, pressure, section, area, speed, power

  Results of researches on an assessment of suitability of atyukhtinsky clay raw material for production of a ceramic brick by way of semidry pressing is shown. It is defined that for receiving the ceramic crock, to GOST meeting requirements, it is necessary to enter into the mass of the mineral calcium additive. Produced a pilot batch of the facial frost-resistant ceramic bricks on Shakhtinskiy factory.

Keywords: ceramic brick, semidry pressing, mineral additive, frost resistance, pilot-industrial testing

  The results of the analysis of existing approaches to the determination of the efficiency of trapping pollutants at their sources of isolation, as well as the prediction of residual contamination of the air of working areas. The classification of methods for determining the effectiveness of local suction ventilation systems. Given the technological distinction between the concepts (factor "technology capture") and sanitary (factor "technological breakthrough"), the efficiency of local suction. The tasks of improving the mathematical description of both types of efficiencies.

Keywords: pollutant, a local suction, efficiency, carbon capture, source separation, capture, simulation

  Methods of personnel number planning are united into 3 groups in service and manufacture companies. Program complex for determination of necessary personnel number is researched. It consists of 3 parts.

Keywords: Methods, program complex, standard, planned, number, uncertainty, workers, specialists

  The system organization assumes formation of the scientific construction complex providing builder’s competitiveness. Sated network model sare perspective.

Keywords: System organization, information, model, investments, market, management

  The article presents a method for the continuous monitoring of airflow in the ventilation system, that the department "Electrical Engineering and Automation" RGSU developed a method based on changes in the frequency and amplitude of the vibrations when the duct airflow. Designed and produced by the device based on piezo transducer prestressing. The principle of the device is based on the use of the frequency and amplitude of the vibrations of the air change rate of air flow. This method of continuous monitoring of air velocity in the duct registers change speed automatically and allows you to monitor the work of ventilation systems.

Keywords: microprocessor, continuous monitoring, automatic control, speed, air flow

  Analysis and evaluation of geological and hydrogeological risks is a special kind of design and survey activities aimed to provide public safety, economyfacilities and the environment within the areas exposed to dangerous geological and engineering-geological processes. The article deals withreduce environmental risksmeasures in case of dangerous geological processes. A variant of engineering-geological zoning of the urban area, depending on the state and properties of the geological environment.

Keywords: ecology, geology, risk.

  The results of the analysis of existing approaches to solving the problem of propagation of impurities in the air and the prediction of residual contamination of the air of working areas. Presented by the rationale for selecting the method of "coarse particles" for the numerical experiment. We describe the nature and advantages of the method as applied to the calculation of the spread of contaminants. An algorithm for prediction of sanitary efficiency of the trapping of pollutants.

Keywords: pollutant, efficiency, simulation, large particles, the Euler's equations, Lagrange's equations, numerical experiment

  In paper results of researches on activation of water-cement suspensions by manufacture of foam concretes nonautoclaving solidification and to increase of activity of cement by machining in electromagnetic apparatuses of a vortex band are presented.

Keywords: machining on cement suspension, increase of durability of a cement stone, processing time of cement, re-crushing of cement, activity of cement, activation, apparatuses of a vortex band

  The introduction of information-analytical system "Energy efficiency" is designed to provide effective information support of management decisions in the energy efficiency of housing stock, the system is a software tool for addressing the state level in the field of energy saving in the housing stock of the Rostov region. The introduction of IAS makes a real contribution to the implementation of the program on energy saving. Development of information-analytical system "Energy efficiency" makes it possible to give complete information of ​​the energy characteristics of the housing stock and to calculate the energy parameters for each of the buildings, simplifies the data acquisition of the energy savings potential and valuation of energy saving activities. Using the work of modern technology allows making informed decisions to adjust the strategy of energy conservation and monitoring the program of energy conservation.

Keywords: Energy-saving, information-analytical system, the strategy of energy saving, energy performance, monitoring

  The research contains the analysis of the main methods and ways to increase efficiency in housing stock. There is given justification of necessity of energy economy and system of the indicators that influence on a choice of energy saving decisions for residential buildings of buildings of different number of storeys. The research contains the assessment of potential of energy saving for housing stock of the city is executed, development of a classification of housing, taking into account the main energy characteristics of buildings, analysis of the effectiveness of energy-saving measures for different types of residential buildings. 

Keywords: Energy saving activities, residential buildings, techniques of a complex assessment, number of storey’s of buildings